「Heavy Metal Discharge Exceeds Limits Again」「Missing Reports Issued by the Management Center!」「Uh-oh!! Here Comes the Environmental Inspection Again!」

 

Do these situations sound familiar? Dealing with heavy metal wastewater seems like an insurmountable challenge, with constant pressure from higher-ups, no budget allocation, and demands for rapid improvements. How about trying a solution like heavy metal chelating agents to effectively treat heavy metal issues in your existing wastewater treatment system?

 

 

The Little Secrets of Heavy Metal Chelating Agents

 

Traditionally, to convert dissolved metal ions into insoluble particles, harsh alkalis like sodium hydroxide are used to adjust the pH of wastewater. This triggers a precipitation reaction forming metal hydroxides. Metal hydroxides are amphoteric, meaning they become increasingly soluble at both low and high pH values. The optimal pH for precipitation (minimum solubility point) varies for each metal. While one metal hydroxide's solubility can be minimized at a certain pH, another metal hydroxide might have higher solubility. Since metal hydroxides are highly soluble, even slight pH changes can redissolve many such hydroxides back into the solution.

 

This is where heavy metal chelating agents come into play. These agents facilitate the formation of metal precipitates, significantly reducing the solubility of metal hydroxides. For instance, sulfide alkali precipitants form metal sulfides, which have lower solubility than the corresponding metal hydroxides.

 

Moreover, metal sulfides aren't amphoteric. For example, lead usually precipitates as a hydroxide at a pH of 9-9.5. Beyond a pH of 9.5, lead hydroxide becomes soluble. Heavy metal chelating agents help form lead sulfide that remains insoluble at higher pH values.

 

These agents are also somewhat "complexation disruptors" as they break down the chelating or complexation rings around metal ions.

 

Heavy metal chelating agents are particularly suitable for treating a variety of heavy metal wastewaters, as they can easily bring heavy metal levels in wastewater down to discharge standards. Some metals precipitate as pH is adjusted, while others do so upon the addition of "heavy metal chelating agents." Additionally, metal hydroxides generate excessive and hard-to-dewater sludge, whereas sludge produced from the addition of heavy metal chelating agents is less in quantity and easier to dewater.

 

While iron salts can sometimes aid hydroxide precipitation, this method generates a significant amount of sludge that's challenging or impossible to dewater. Data suggests that one pound of iron salt produces eight pounds of sludge!

 

Industrial processes often yield wastewater containing multiple metals. For instance, typical wastewater from printed circuit board manufacturing contains copper, tin, lead, and nickel. Handling these mixed metals with hydroxide precipitation poses problems, as the ideal pH for one metal might redissolve another metal into the solution.

 

Furthermore, chelating agents, additives, cleaning agents, and chemical compounds interfere with hydroxide precipitation reactions. Eliminating these components directly from wastewater is practically unfeasible. The best approach is to segregate and pre-treat these components at the forefront of the process. Alternatively, heavy metal chelating agents can be used alongside pH adjustment in the backend wastewater treatment unit.

 

(Note: The provided translation is an attempt to capture the essence of the original text while maintaining clarity and coherence. Some rephrasing and adjustments have been made for readability.)