German AM Tuning's Approach to EGR Valve Treatment~

 

Opting for Cleaning over Replacement!! More Economical!!

 

Switching to Water-Based Cleaners instead of Solvents!! More Environmentally Friendly!!

 

 

 

AM Tuning, located in Rheda-Wiedenbrück in northwest Germany, is a car maintenance workshop offering regular services such as oil changes, air conditioning and tire maintenance, as well as biennial TÜV inspections.https://www.am-tuning.eu/

 

In recent maintenance processes, AM Tuning employs the CB 100 Alu + ultrasonic cleaning machine to clean Exhaust Gas Recirculation (EGR) valves, replacing traditional solvents. Services are available for vehicles of all brands. EGR valves are easily disassembled and cleaned in an ultrasonic bath. CB 100 Alu cleaner prevents corrosion. Cleaning the valve can reduce unnecessary expenses, opting for cleaning rather than replacing new parts.

 

Advantages of this cleaning solution include:

 

✔ Environmental and user protection: Labeling and VOC-free

✔ Brake cleaner alternative

✔ High dissolving power: for stubborn dirt

✔ Works even at low temperatures: CLEANBLUE

✔ Optimal drainage capacity, more effectively protecting against environmental impact

 

Actual steps for cleaning the Exhaust Gas Recirculation (EGR) valve:

 

1.Place the EGR valve in the prepared CB 100 Alu cleaning solution tank, with the Bio-Circle ultrasonic oscillating machine.

 

 

2.Clean under conditions heated to 40°C for 20-30 minutes.

 

 

3.Remove the cleaned EGR valve and confirm the cleaning condition.

 

 

4.Compare before and after cleaning.

 

 

Complete video link:

 

 

CB 100 Alu Solvent Alternative

 

 

CB 100 Alu boasts high dissolving power and, due to its special protective formula, prevents aluminum, brass, and non-ferrous metals from losing their luster.

 

Cold cleaner alternatives are also suitable for ultrasonic and immersion applications.

 

Product Features

 

• Removes extremely persistent, burnt-on dirt, special oils, grease, oil, smoke, soot, rubber residues, asphalt and wax residues, as well as pasty substances.
• Cleans stainless steel, steel, aluminum, brass, and non-ferrous metals.
• Prevents loss of luster → aluminum protective formula
• Suitable for temporary intermediate storage → mild corrosion protection
• Long service life → recyclable, demulsifying
• Occupational safety and environmental protection → VOC-free and labeled
• For manual and automatic use

 

Application Areas

 

• For industrial and workshop use
• Applications in production sites as well as maintenance and service
• Pre-cleaning of components
• Suitable for cleaning injection molded parts
• Ultrasonic systems
• Removal of coolants and cutting oils from machined parts in machining workshops
• Degreasing of engine components during maintenance and rebuilding operations
• Immersion