Bio-Circle and NSF certification

 

Bio-Circle focuses on NSF certified products in the field of cleaning, which can be used in food-related areas, such as industrial kitchens, food industries or checkout areas, and other non-food direct contact applications. The main categories are Category A1 for general surface cleaning in food processing areas, Category C1 for first shift cleaning in non-food processing areas, Category A3 for general surface acid cleaning in food processing areas, and Category K1 for solvent cleaning in non-food processing areas. The corresponding table of the above related products is as follows:

 

Product	Reg.-no	Category Code
ALUSTAR 100	166498	A1
BIO-CIRCLE L EVO	160771	C1
BIO-CIRCLE L Ultra	146757	A1
BIO-CIRCLE™ LIQUID	139721	C1
CB 100	146719	C1
CB 100 Alu	165198	A1
CB 100 Blue	151838	A1
For Clean F	156736	A1
FOR CLEAN V	151839	A1
FT 100	142389	A1
FT 200	162745	A1
GS 200	146720	K3
Power Cleaner 100	141944	A3
Power Cleaner 150	152259	A3
Power Cleaner 200	168352	A3
Power Cleaner 400	165197	A3
Power Cleaner DB	156735	A3
Smoke Resin Remover	147908	A1
UNO	141943	A1
UNO S	141942	A1
UNO S F	144386	A1
UNO S V	142391	A1

 

Low-volatility water-based strong cleaning replaces solvents and CHC

 

The powerful version of the UNO series acts fast and deep. Water-based heavy-duty cleaner that reduces VOCs and is phosphate-free. They can be used anywhere stubborn contaminants need to be removed. They are material-friendly, have good wetting properties and strong cleaning power, and are suitable for manual and mechanical use. If you want to clean without the use of solvents and CHC, you will find UNO S F, UNO S PF and UNO S V suitable alternatives.

 

▲UNO SF is well suited for high pressure cleaning applications

 

UNO is an aqueous, alkaline and phosphate-free strong cleaner for manual use and application systems, CLEANBOX and automatic washing machines. The following are several series of products:

 

UNO SF is a low foaming strong cleaner also suitable for mechanical use. NSF Certified (Class A1, Registration No.: 144386).

 

UNO SV is a viscous powerful cleaner ideal for manual use in foam dispensers, FOAM BOOSTERs and foam sprayers. NSF Certified (Class A1, Reg. No.: 142391).

 

UNO AV uses an application system for large area applications and is volatile organic compound (VOC) free.

 

UNO X is a gel foam cleanser for hands. Ideal for foam dispensers and also for vertical surfaces.

 

UNO W is an alkaline water based shop cleaner with temporary corrosion protection suitable for manual cleaning.

 

UNO S PF is a low foaming strong cleaner for mechanical use. It has temporary corrosion protection.

UNO SF Water-Based Low Foam Cleaning

 

 

For stubborn dirt, this agent can be used as a concentrated agent, and in other cases, it can be diluted with water at a ratio of 1:40. Concentrations used range from 3% to 5%. UNO SF is highly efficient at room temperature. Its use can help you reduce costs and minimize cleaning downtime for bath changes.

 

Burnt oil, grease, resinous oils, pigment inks, protein residues and similar dirt are easily removed with UNO SF. It's gentle on surfaces, which means it can be used on sensitive materials. However, do not use concentrate on aluminum surfaces and zinc coatings - for proper surface protection a 1:30 to 1:40 dilution with water is recommended.

 

Device	Dilution ratio	Dilution %	Application	Suitable material
Hand Sprayer	1:40-1:30	2.5-3.3%	Remove light dirt	Aluminum, non-ferrous metals, plastics
Hand Sprayer	1:40-1:10	2.5-10%	Remove light dirt	Steel, stainless steel, plastic
Hand Sprayer	Stock solution-1:10	Stock solution-10%	Removal of heavy organic pollutants	Steel, stainless steel
Ultrasound	1:40-1:30	2.5-3.5%	Remove light dirt	Aluminum, non-ferrous metals, plastics
Ultrasound	1:40-1:10	2.5-10%	Removal of light to heavy organic pollutants	Steel, stainless steel, plastic
Ultrasound	Stock solution-1:10	Stock solution-10%	Removal of heavy organic pollutants	Steel, stainless steel
Scrubbing machine	1:30-1:10	3.3-10%	Maintenance and degreasing of floors	Tile floors, hard floors, concrete, epoxy floors,
Pressure washing	1:30-1:40	2.5-3.3%	Pressure washing	Aluminum bodywork, siding
Pressure washing	1:30-1:20	3.3-5%	Pressure washing	Bodywork, floors, walls, vinyl siding
Heat pressure washing	1:40-1:30	2.5-3.3%	Cleaning and degreasing of parts containing small amounts of organic contamination	Aluminum, colored and gold, plastic
Heat pressure washing	1:40-1:10	2.5-10%	Cleaning and degreasing of parts containing light to heavy organic contamination	Steel, stainless steel, plastic
Heat pressure washing	Stock solution-1:10	Stock solution-10%	Cleaning and degreasing of parts with high levels of heavy organic contamination	Steel, stainless steel
Soak	Stock solution-1:10	Stock solution-10%	Soak light to heavy organic pollutants	Steel, stainless steel

 

UNO SV Aqueous Foam Cleaning

 

 

UNO SV has been developed taking into account the specific requirements related to the cleaning of vertical and inclined surfaces. Its viscosity makes it easy to use on surfaces where traditional cleaners run off. UNO SV forms a gel-like film that adheres to the surface, allowing optimal exposure time to remove dirt.

 

This alkaline powerful cleaner easily removes vegetable and mineral oils, fats, protein residue, mold release agents, smoke residue and wax, fresh paint and pigment ink residue, and many other grime. The formulation can be used on various surfaces such as metal, wood, plastic and ceramics as it is gentle and does not damage the surface. However, do not use concentrates on aluminum surfaces and zinc coatings - for proper surface protection a 1:30 to 1:40 dilution with water is recommended. The product is environmentally friendly - biodegradable, complies with EU guidelines, it is non-flammable and free of phosphates and nitrilotriacetic acid (NTA).