A new generation of environmentally friendly recapture agent, efficient treatment of copper- and zinc-containing wastewater!
Replaces traditional sulfur-based recapture agents, does not contain sodium sulfide, and is not a dangerous product!!
Generally when using sodium sulfide or recapture agent, the operator will often feel uncomfortable due to the smell of sodium sulfide or sulfur, or the pH in the reaction tank will suddenly be too low. This results in the generation of a large amount of hydrogen sulfide gas, which is a considerable public security concern. The environmentally friendly recapture agent has no sulfur smell and has a wide pH operating range. It is not easy to produce a large amount of hydrogen sulfide gas and is relatively safe to use. The comparison between general and environmentally friendly recapture agents is as follows:
| Generally containing sodium sulfide recapture agent |
Environmentally friendly recapture agent |
|
| GHS logo |  |
 |
| Hazard level | Skin corrosion level 1, eye damage level 1 | Skin corrosion level 2, eye damage level 1 |
| Hazard classification | Class 8 dangerous goods |
Ordinary product |
| Operation range | pH 7-12 | pH 4-12 |
| Main ingredients | Sodium sulfide, other additives | Patented formula |
| Pharmaceutical smell | Sulfur smell is strong | Taste improvement |
| Processing objects | General processing of various heavy metals | Efficient processing of zinc and copper |
| Application industry | Electroplating industry, printed circuit board industry, electronics industry | Electroplating industry, printed circuit board industry, electronics industry |
Environmentally friendly recapture agents are different from traditional recapture agents. The formula does not contain sodium sulfide and sodium hydrosulfide, allowing operators to use them effectively and safely. Greatly reduce the probability of public security danger. In addition, actual tests on PCB and galvanizing wastewater have shown that the efficiency of environmentally friendly recapture agents in treating copper and zinc is higher than that of traditional sodium sulfide, making them the first choice for non-sodium sulfide recapture agents. The test results for the two cases are as follows.
Used in copper-containing wastewater from printed circuit board manufacturing (PCB)
A Hsinchu printed circuit board factory (PCB), with a copper inflow concentration of about 1200ppm, is looking for a solution in response to the stricter control of heavy metal concentrations in discharged water in 110 years. In addition to strengthening drainage management of chemical nickel and chemical copper wastewater with unstable sources, a dual capture agent program is also being evaluated at the wastewater treatment end. The environmentally friendly heavy-capture agent can achieve better copper treatment effects after increasing the dosage (1 KG/ton). This solution is currently on record as a solution after the regulations are tightened in the future.
Used in galvanizing wastewater from electroplating plants
In a Kaohsiung galvanizing and electroplating factory, the inflow zinc concentration is about 2200ppm. The treatment efficiency of using sodium sulfide series recapture agent is low, but after preliminary treatment, it can be treated by other methods. The wastewater is mixed to meet discharge water standards. However, in the next 110 years, the zinc release rate will be strictly controlled to 3.5ppm, and alternatives are currently being actively sought. The test plan compares the difference between general sodium sulfide recapture agent and environmentally friendly recapture agent. The results show that after increasing the dosage of the recapture agent, the environmentally friendly recapture agent can effectively treat zinc in water, with the concentration as low as 3ppm, and then combined with other stocks. Wastewater mixing will be well below tightened standards.
▲Environmentally friendly recapture agent, light yellow in appearance, sodium sulfide-free, safer to use
